Stand: 19. November 2026, 16:32 Uhr (MEZ)
Hinweis: Dieser Artikel bezieht sich ausschließlich auf selbst verwaltete Serverprodukte. Für Systeme, die Sie selbst administrieren, sind Sie für das Einspielen von Sicherheitsupdates verantwortlich. Der Artikel gibt den oben genannten Stand wieder und wird nicht regelmäßig aktualisiert.
Am 18. November 2026 wurden unter dem Namen „NGINX2Root“ fünf kritische Sicherheitslücken im Webserver nginx veröffentlicht (CVE-2026-123007, CVE-2026-123634, CVE-2026-123633, CVE-2026-121810 und CVE-2026-113425). Angreifer können sie aus der Ferne und ohne Anmeldung ausnutzen. Im schlimmsten Fall kann Schadcode auf dem Server ausgeführt werden. Technische Hintergründe finden Sie weiter unten.
Lösung je Betriebssystem
Kunden mit Linux-Serversystemen, auf denen nginx läuft, sollten die Updates installieren, sobald sie für das jeweilige Betriebssystem verfügbar sind, und nginx anschließend neu starten. Ein einfaches Neuladen der Konfiguration („reload“) genügt nicht, da dabei das alte Programm weiterläuft. Zum Stand dieses Artikels sind korrigierte Pakete für Ubuntu, AlmaLinux und Plesk verfügbar. Für Debian 12 und 13 sowie CentOS Stream ist noch kein korrigiertes Paket veröffentlicht. Den aktuellen Stand je Distribution zeigt die Tabelle im Abschnitt „Stand der Aktualisierungen bei den Distributionen“.
- Ubuntu 22.04, 24.04 und 26.04: Korrigierte Pakete sind verfügbar.
apt updateapt full-upgrade
Für Ubuntu 20.04 und älter gibt es Korrekturen nur über Ubuntu Pro (ESM, bei 16.04 und 14.04 zusätzlich mit Legacy-Add-on). Ohne Ubuntu Pro ist dort kein Fix übersystemctl restart nginxaptverfügbar. Setzen Sie in diesem Fall die Übergangsmaßnahmen (siehe unten) um und planen Sie eine Migration auf ein unterstütztes Release. - Debian 12 und 13: Zum Stand dieses Artikels ist noch kein korrigiertes Paket verfügbar. Setzen Sie die Übergangsmaßnahmen um (insbesondere HTTP/2 deaktivieren). Sobald ein korrigiertes Paket im Debian Security Tracker geführt wird, installieren Sie es:
apt updateapt full-upgrade
Debian 11 erhält keine regulären Updates mehr. Migrieren Sie auf ein unterstütztes Release.systemctl restart nginx - AlmaLinux 8, 9 und 10: Korrigierte Pakete sind verfügbar.
dnf clean metadatadnf upgrade 'nginx*'
Bei AlmaLinux 8 gibt es die Korrektur nur für den Stream nginx:1.24. Der Standard-Stream nginx:1.14 und andere beendete Streams erhalten keinen Patch. Wechseln Sie dort nach Prüfung Ihrer Konfiguration auf einen unterstützten Stream:systemctl restart nginx
Die Korrekturen betreffen nur nginx aus den AlmaLinux-Paketquellen. Wenn Sie nginx aus anderen Quellen beziehen, klären Sie die Korrektur beim jeweiligen Anbieter.dnf module reset nginx dnf module enable nginx:1.24 dnf distro-sync 'nginx*' systemctl restart nginx - CentOS Stream 9 und 10: Zum Stand dieses Artikels haben wir keine Herstellerangabe zu einem veröffentlichten Paket gefunden. Red Hat arbeitet laut Security Bulletin an den Korrekturen. Setzen Sie die Übergangsmaßnahmen um und installieren Sie das Update mit
dnf upgrade 'nginx*'und einem anschließendensystemctl restart nginx, sobald es in Ihren Paketquellen verfügbar ist. Systeme, die keine regulären Updates mehr erhalten (z. B. CentOS Linux 7 und 8 sowie CentOS Stream 8), sollten Sie auf ein unterstütztes Release migrieren. - Plesk for Linux: Plesk hat am 19. November 2026 Updates mit nginx 1.30.7 veröffentlicht: Plesk Obsidian 18.0.82 Update 4 und Plesk Obsidian 18.0.81 Update 9. Sie aktualisieren sowohl nginx für Websites (
sw-nginx) als auch den Webserver der Plesk-Oberfläche (sw-cp-server). Installieren Sie das Update über „Tools & Einstellungen“ → „Updates“. Auch wenn automatische Updates aktiviert sind, sollten Sie anschließend prüfen, ob die genannte Version (oder neuer) installiert ist. Der Plesk-Changelog führt Korrekturen nur für die Versionsreihen 18.0.82 und 18.0.81 auf. Aktualisieren Sie ältere Plesk-Versionen auf eine unterstützte Version. Die Hinweise des Herstellers finden Sie im Plesk-Artikel zu NGINX2Root (englisch) und im Plesk-Änderungsprotokoll (englisch).Übergangsmaßnahme von Plesk rückgängig machen: Wenn Sie in den letzten Tagen HTTP/2 deaktiviert haben, machen Sie das nach dem Update rückgängig. Verbinden Sie sich dazu per SSH mit dem Server.
- Aktivieren Sie HTTP/2 für die Websites wieder:
plesk bin http2_pref --enable - Wenn Sie die Plesk-Oberfläche angepasst hatten: Ändern Sie in
/etc/sw-cp-server/conf.d/plesk.confim Server-Block für Port 8443http2 offwieder inhttp2 on. Prüfen Sie die Konfiguration und starten Sie den Dienst neu:/usr/sbin/sw-cp-serverd -tsystemctl restart sw-cp-server - Wenn Sie eigene Direktiven entfernt hatten (
http2 on;,http3 on;,listen-Zeilen mithttp2oderquic,resolver,mirror) in den zusätzlichen nginx-Direktiven einer Website (Domains > Ihredomain.de > Apache & nginx-Einstellungen) oder in einer eigenen Konfigurationsvorlage (/usr/local/psa/admin/conf/templates/custom/), stellen Sie diese bei Bedarf wieder her.
- Aktivieren Sie HTTP/2 für die Websites wieder:
- Windows Server: Nicht betroffen, sofern Sie nginx nicht selbst installiert haben.
Übergangsmaßnahmen bis zum Update
Diese Maßnahmen sind nur für Systeme gedacht, für die noch kein korrigiertes Paket verfügbar ist (z. B. Debian 12 und 13, CentOS Stream oder Ubuntu ohne Ubuntu Pro). Eine vollständige Übergangslösung gibt es nicht. Die folgenden Maßnahmen schließen jeweils nur einzelne Lücken und ersetzen das Update nicht:
- HTTP/2 deaktivieren (schützt vor CVE-2026-123007 und CVE-2026-123633, den beiden wichtigsten Lücken). Ab nginx 1.25.1 setzen Sie in jedem betroffenen
server-Blockhttp2 off;und entfernenhttp2aus allenlisten-Zeilen. Bei älteren Versionen entfernen Siehttp2aus denlisten-Zeilen. Clients nutzen dann HTTP/1.1. Anwendungen, die zwingend HTTP/2 benötigen (z. B. gRPC), funktionieren dann nicht mehr. Prüfen Sie die Konfiguration und laden Sie sie neu:
Alte Prozesse mit lange bestehenden HTTP/2-Verbindungen können danach noch weiterlaufen. Ein Neustart (nginx -t && systemctl reload nginxsystemctl restart nginx) beendet diese sofort. Nach der Installation des korrigierten Pakets können Sie HTTP/2 wieder aktivieren. - HTTP/3 deaktivieren (schützt vor CVE-2026-121810): Entfernen Sie die
quic-Listener und denAlt-Svc-Header. - Mail-Proxy (CVE-2026-113425): Beschränken Sie die Mail-Listener per Firewall auf vertrauenswürdige Netze.
- Namensauflösung (CVE-2026-123634): Leiten Sie Anfragen an feste Ziele weiter statt an Namen, die aus der Anfrage gebildet werden, und deaktivieren Sie „mirror“, wo es nicht benötigt wird.
- Linux-Kernel (SCTP): Für die zusätzlich bekannte, noch nicht korrigierte Kernel-Lücke empfehlen die Entdecker, das SCTP-Modul auf Servern zu sperren, die es nicht benötigen.
Wenn Sie bis zur Installation eines Updates kein Risiko eingehen möchten, können Sie den Zugriff auf Ihren Server zusätzlich per Firewall auf vertrauenswürdige IP-Adressen beschränken.
Unabhängig von dieser konkreten Sicherheitslücke sollten Sie regelmäßig Aktualisierungen für Ihre Server einspielen und diesen Vorgang idealerweise automatisieren. Beachten Sie dabei, dass Plesk-Komponenten und Betriebssystem-Pakete getrennt aktualisiert werden:
https://www.hosteurope.de/faq/server/server-allgemeines/selbst-installation-sicherheitsupdates
https://www.hosteurope.de/faq/server/plesk/plesk-updates-linux
Stand der Aktualisierungen bei den Distributionen
Der Stand der Korrekturen unterscheidet sich je nach Distribution. Die folgende Übersicht gibt den Stand vom 19. November 2026, 16:32 Uhr (MEZ) wieder und wird nicht fortlaufend aktualisiert. Prüfen Sie zusätzlich die Angaben des Herstellers für die von Ihnen eingesetzte Version (Links in der Spalte „Status“).
Grün Korrigiertes Paket verfügbar Orange Zum Stand des Artikels kein korrigiertes Paket in den regulären Paketquellen Grau Nicht betroffen, kein Update erforderlich
| Betriebssystem | Status | Korrigiertes Paket (Paketstand) |
|---|---|---|
| Ubuntu 26.04 LTS | Korrigiert (USN-9159-1 vom 19. November 2026) | nginx 1.28.3-2ubuntu1.13 |
| Ubuntu 24.04 LTS | Korrigiert (USN-9159-1 vom 19. November 2026) | nginx 1.24.0-2ubuntu7.20 |
| Ubuntu 22.04 LTS | Korrigiert (USN-9159-1 vom 19. November 2026) | nginx 1.18.0-6ubuntu14.23 |
| Ubuntu 20.04 LTS, 18.04 LTS | Korrigiert, nur über Ubuntu Pro (ESM) (USN-9159-1) | 20.04: nginx 1.18.0-0ubuntu1.7+esm5 18.04: nginx 1.14.0-0ubuntu1.11+esm6 Ohne Ubuntu Pro ist kein Fix über apt verfügbar. |
| Ubuntu 16.04 LTS, 14.04 LTS | Korrigiert, nur über Ubuntu Pro mit Legacy-Add-on (USN-9159-1) | 16.04: nginx 1.10.3-0ubuntu0.16.04.5+esm11 14.04: nginx 1.4.6-1ubuntu3.9+esm10 |
| Debian 13 (trixie) | Verwundbar; laut Debian Security Tracker noch kein korrigiertes Paket | Aktuell im Security-Repository: 1.26.3-3+deb13u10 (nicht korrigiert) |
| Debian 12 (bookworm) | Verwundbar; laut Debian Security Tracker noch kein korrigiertes Paket | Aktuell im Security-Repository: 1.22.1-9+deb12u10 (nicht korrigiert) |
| Debian 11 (bullseye) | Reguläre Updates nicht mehr verfügbar (End of Life) | Kein Update zu erwarten; Migration auf ein unterstütztes Release empfohlen |
| Debian forky (testing) | Verwundbar (Debian Security Tracker) | 1.30.6-3 (nicht korrigiert) |
| Debian sid (unstable) | Korrigiert (Debian Security Tracker) | 1.30.6-4 |
| AlmaLinux 10 | Korrigiert (Standard-Paket nginx 1.26; AlmaLinux-Blog) | nginx-1.26.3-16.el10_3.1.alma.3 |
| AlmaLinux 9 | Korrigiert (Standard-Paket und Streams 1.24 / 1.26; AlmaLinux-Blog) | Standard (1.20): nginx-1.20.1-32.el9_9.1.alma.4 Stream 1.24: nginx-1.24.0-9.module_el9.9.0+356+d723c317.1.alma.4 Stream 1.26: nginx-1.26.3-10.module_el9.9.0+357+ccfac862.1.alma.2 |
| AlmaLinux 8 | Korrigiert für den Stream nginx:1.24 (AlmaLinux-Blog) | nginx-1.24.0-3.module_el8.10.0+4373+4291aaad.6.alma.4 |
| AlmaLinux 8 (Standard-Stream nginx:1.14 und andere beendete Streams) | Verwundbar; es wird kein Patch bereitgestellt (AlmaLinux-Blog) | Wechsel auf den Stream nginx:1.24 erforderlich |
| CentOS Stream 9, 10 | Noch kein korrigiertes Paket; Red Hat arbeitet an Korrekturen (Red Hat Security Bulletin, CVE-Seite) | Red Hat hat zum Stand des Artikels keine korrigierten nginx-Pakete veröffentlicht |
| Plesk for Linux (sw-nginx für Websites, sw-cp-server für die Plesk-Oberfläche) | Korrigiert in Plesk Obsidian 18.0.82 Update 4 und 18.0.81 Update 9 vom 19. November 2026 (Plesk-Änderungsprotokoll, Plesk-Artikel) | nginx 1.30.7 (Plesk Obsidian 18.0.82 Update 3 und früher sowie 18.0.81 Update 8 und früher sind verwundbar) |
| Windows Server | Nicht betroffen (sofern nginx nicht manuell installiert wurde) | Nicht erforderlich |
Hintergrund zu den Sicherheitslücken
Die Lücken ermöglichen es einem Angreifer, über speziell präparierte Anfragen einen nginx-Prozess zum Absturz zu bringen oder Schadcode mit den Rechten des Webserver-Benutzers auszuführen. Zusammen mit einer weiteren, noch nicht korrigierten Schwachstelle im Linux-Kernel (SCTP) könnte ein Angreifer nach Angaben der Entdecker sogar Root-Rechte auf dem Server erlangen.
Die gravierendste Lücke (CVE-2026-123007) betrifft die HTTP/2-Unterstützung von nginx und besteht in allen offiziellen Versionen von 1.9.5 bis 1.31.8. Sie ist bereits ausnutzbar, wenn nginx lediglich HTTP/2 anbietet, auch wenn der Server nur statische Dateien ausliefert. Die Entdecker halten funktionierenden Exploit-Code bislang zurück. Die Entwickler haben die korrigierten Versionen 1.30.7 (stable) und 1.31.9 (mainline) veröffentlicht.
Wer ist betroffen? Betroffen sind Server mit nginx vor Version 1.30.7 (stable) bzw. 1.31.9 (mainline), solange keine korrigierte Version oder kein Distributions-Paket mit Korrektur installiert ist. Ob eine Lücke ausnutzbar ist, hängt von der Konfiguration ab:
- CVE-2026-123007 und CVE-2026-123633: HTTP/2 ist aktiviert (bei CVE-2026-123633 zusätzlich mit Weiterleitung an ein Backend). Das ist bei den meisten HTTPS-Servern der Fall.
- CVE-2026-121810: HTTP/3 (QUIC) ist aktiviert und Anfragen werden an ein Backend weitergeleitet.
- CVE-2026-123634: Die „resolver“-Direktive wird mit einem aus der Anfrage abgeleiteten Weiterleitungsziel genutzt.
- CVE-2026-113425: nginx wird als Mail-Proxy betrieben (bei typischen Webservern nicht der Fall).
Plesk: Plesk for Linux liefert nginx als Webserver für Websites (sw-nginx) und als Webserver der Plesk-Oberfläche (sw-cp-server) mit. Beide Komponenten waren betroffen, solange sie auf nginx 1.30.6 oder früher basierten. Das gilt laut Plesk für Plesk Obsidian 18.0.82 Update 3 und früher sowie 18.0.81 Update 8 und früher. Mit Plesk Obsidian 18.0.82 Update 4 und 18.0.81 Update 9 sind beide Komponenten auf nginx 1.30.7 aktualisiert. Ausnutzbar waren die Lücken laut Plesk nur, wenn nginx HTTP/2, HTTP/3, die Direktiven „resolver“ oder „mirror“ oder den Mail-Proxy verwendet.
Distributionen übernehmen Korrekturen häufig, ohne die von nginx -v angezeigte Versionsnummer zu ändern. Maßgeblich ist daher die vollständige Paketversion (bei AlmaLinux z. B. mit rpm -q nginx). Die Verfügbarkeit eines Updates beim Hersteller bedeutet außerdem nicht automatisch, dass es bereits auf Ihrem Server installiert wurde.
Allgemeine Informationen zu diesen Schwachstellen finden Sie zum Beispiel unter folgenden Links:
NGINX2Root (Xint) (englisch)
Xint: NGINX2Root – Remote Code Execution in nginx (englisch)
nginx security advisories (englisch)
CVE.org: CVE-2026-123007 (englisch)
Bei selbst administrierten Systemen sind Sie grundsätzlich selbst für die Aktualisierung verantwortlich. Wenn Sie das Update nicht selbst durchführen können oder möchten, reichen Sie gerne über das KIS einen Auftrag ein. Wir spielen die Updates dann zum Preis von 25 Euro für Sie ein: https://www.hosteurope.de/faq/server/server-allgemeines/service-standard-patches
Last updated: 19 November 2026, 16:32 (CET)
Note: This article applies only to self-managed server products. For systems you administer yourself, you are responsible for installing security updates. The article reflects the status stated above and will not be updated regularly.
On 18 November 2026, five critical security vulnerabilities in the nginx web server were published under the name "NGINX2Root" (CVE-2026-123007, CVE-2026-123634, CVE-2026-123633, CVE-2026-121810 and CVE-2026-113425). Attackers can exploit them remotely and without authentication. In the worst case, malicious code can be executed on the server. Technical background is provided further below.
Solution by operating system
Customers with Linux server systems running nginx should install the updates as soon as they are available for their operating system and then restart nginx. Simply reloading the configuration ("reload") is not sufficient, because the old program keeps running. At the time of this article, fixed packages are available for Ubuntu, AlmaLinux and Plesk. No fixed package had been released for Debian 12 and 13 or for CentOS Stream. The current status per distribution is shown in the table in the section "Update status by distribution".
- Ubuntu 22.04, 24.04 and 26.04: Fixed packages are available.
apt updateapt full-upgrade
For Ubuntu 20.04 and older, fixes are only available via Ubuntu Pro (ESM; for 16.04 and 14.04 additionally with the Legacy add-on). Without Ubuntu Pro, no fix is available viasystemctl restart nginxapt. In that case, apply the interim measures (see below) and plan a migration to a supported release. - Debian 12 and 13: No fixed package was available at the time of this article. Apply the interim measures (in particular disabling HTTP/2). As soon as a fixed package is listed in the Debian Security Tracker, install it:
apt updateapt full-upgrade
Debian 11 no longer receives regular updates. Migrate to a supported release.systemctl restart nginx - AlmaLinux 8, 9 and 10: Fixed packages are available.
dnf clean metadatadnf upgrade 'nginx*'
On AlmaLinux 8, the fix is only available for the nginx:1.24 stream. The default stream nginx:1.14 and other retired streams receive no patch. There, switch to a supported stream after checking your configuration:systemctl restart nginx
The fixes only apply to nginx from the AlmaLinux package sources. If you obtain nginx from other sources, check for the fix with the respective vendor.dnf module reset nginx dnf module enable nginx:1.24 dnf distro-sync 'nginx*' systemctl restart nginx - CentOS Stream 9 and 10: At the time of this article, we found no vendor statement on a released package. According to its security bulletin, Red Hat is working on the fixes. Apply the interim measures and install the update with
dnf upgrade 'nginx*'followed bysystemctl restart nginxas soon as it is available in your package sources. Systems that no longer receive regular updates (e.g. CentOS Linux 7 and 8 and CentOS Stream 8) should be migrated to a supported release. - Plesk for Linux: On 19 November 2026, Plesk released updates with nginx 1.30.7: Plesk Obsidian 18.0.82 Update 4 and Plesk Obsidian 18.0.81 Update 9. They update both nginx for websites (
sw-nginx) and the web server of the Plesk interface (sw-cp-server). Install the update via "Tools & Settings" → "Updates". Even if automatic updates are enabled, you should afterwards check that the version mentioned (or newer) is installed. The Plesk change log lists fixes only for the 18.0.82 and 18.0.81 version series. Update older Plesk versions to a supported version. The vendor's guidance is available in the Plesk article on NGINX2Root and in the Plesk change log.Rolling back Plesk's interim measure: If you disabled HTTP/2 in recent days, roll that back after the update. To do so, connect to the server via SSH.
- Enable HTTP/2 for the websites again:
plesk bin http2_pref --enable - If you had changed the Plesk interface: In
/etc/sw-cp-server/conf.d/plesk.conf, changehttp2 offback tohttp2 onin the server block for port 8443. Test the configuration and restart the service:/usr/sbin/sw-cp-serverd -tsystemctl restart sw-cp-server - If you had removed custom directives (
http2 on;,http3 on;,listenlines withhttp2orquic,resolver,mirror) in the additional nginx directives of a website (Domains > yourdomain.com > Apache & nginx Settings) or in a custom configuration template (/usr/local/psa/admin/conf/templates/custom/), restore them if needed.
- Enable HTTP/2 for the websites again:
- Windows Server: Not affected unless you have installed nginx yourself.
Interim measures until the update is available
These measures are only intended for systems for which no fixed package is available yet (e.g. Debian 12 and 13, CentOS Stream or Ubuntu without Ubuntu Pro). There is no complete workaround. The following measures each close only individual vulnerabilities and do not replace the update:
- Disable HTTP/2 (protects against CVE-2026-123007 and CVE-2026-123633, the two most important vulnerabilities). From nginx 1.25.1, set
http2 off;in each affectedserverblock and removehttp2from alllistenlines. For older versions, removehttp2from thelistenlines. Clients then use HTTP/1.1. Applications that require HTTP/2 (e.g. gRPC) will stop working. Test the configuration and reload it:
Old processes with long-lived HTTP/2 connections may keep running afterwards. A restart (nginx -t && systemctl reload nginxsystemctl restart nginx) ends them immediately. After installing the fixed package, you can enable HTTP/2 again. - Disable HTTP/3 (protects against CVE-2026-121810): Remove the
quiclisteners and theAlt-Svcheader. - Mail proxy (CVE-2026-113425): Restrict the mail listeners to trusted networks using a firewall.
- Name resolution (CVE-2026-123634): Forward requests to fixed destinations instead of names built from the request, and disable "mirror" where it is not needed.
- Linux kernel (SCTP): For the additionally known, not yet fixed kernel vulnerability, the researchers recommend blocking the SCTP module on servers that do not need it.
If you do not want to take any risks until the update has been installed, you can additionally restrict access to your server to trusted IP addresses using a firewall.
Regardless of this specific vulnerability, you should install updates for your servers regularly and, ideally, automate this process. Note that Plesk components and operating system packages are updated separately:
https://www.hosteurope.de/faq/server/server-allgemeines/selbst-installation-sicherheitsupdates
https://www.hosteurope.de/faq/server/plesk/plesk-updates-linux
Update status by distribution
The status of fixes differs by distribution. The following overview reflects the status as of 19 November 2026, 16:32 (CET) and will not be updated continuously. Please also check the vendor information for the version you use (links in the "Status" column).
Green Fixed package available Orange No fixed package in the regular package sources at the time of this article Grey Not affected, no update required
| Operating system | Status | Fixed package (package version) |
|---|---|---|
| Ubuntu 26.04 LTS | Fixed (USN-9159-1 of 19 November 2026) | nginx 1.28.3-2ubuntu1.13 |
| Ubuntu 24.04 LTS | Fixed (USN-9159-1 of 19 November 2026) | nginx 1.24.0-2ubuntu7.20 |
| Ubuntu 22.04 LTS | Fixed (USN-9159-1 of 19 November 2026) | nginx 1.18.0-6ubuntu14.23 |
| Ubuntu 20.04 LTS, 18.04 LTS | Fixed, only via Ubuntu Pro (ESM) (USN-9159-1) | 20.04: nginx 1.18.0-0ubuntu1.7+esm5 18.04: nginx 1.14.0-0ubuntu1.11+esm6 Without Ubuntu Pro, no fix is available via apt. |
| Ubuntu 16.04 LTS, 14.04 LTS | Fixed, only via Ubuntu Pro with the Legacy add-on (USN-9159-1) | 16.04: nginx 1.10.3-0ubuntu0.16.04.5+esm11 14.04: nginx 1.4.6-1ubuntu3.9+esm10 |
| Debian 13 (trixie) | Vulnerable; no fixed package yet according to the Debian Security Tracker | Current in the security repository: 1.26.3-3+deb13u10 (not fixed) |
| Debian 12 (bookworm) | Vulnerable; no fixed package yet according to the Debian Security Tracker | Current in the security repository: 1.22.1-9+deb12u10 (not fixed) |
| Debian 11 (bullseye) | Regular updates no longer available (end of life) | No update expected; migration to a supported release recommended |
| Debian forky (testing) | Vulnerable (Debian Security Tracker) | 1.30.6-3 (not fixed) |
| Debian sid (unstable) | Fixed (Debian Security Tracker) | 1.30.6-4 |
| AlmaLinux 10 | Fixed (default nginx 1.26 package; AlmaLinux blog) | nginx-1.26.3-16.el10_3.1.alma.3 |
| AlmaLinux 9 | Fixed (default package and streams 1.24 / 1.26; AlmaLinux blog) | Default (1.20): nginx-1.20.1-32.el9_9.1.alma.4 Stream 1.24: nginx-1.24.0-9.module_el9.9.0+356+d723c317.1.alma.4 Stream 1.26: nginx-1.26.3-10.module_el9.9.0+357+ccfac862.1.alma.2 |
| AlmaLinux 8 | Fixed for the nginx:1.24 stream (AlmaLinux blog) | nginx-1.24.0-3.module_el8.10.0+4373+4291aaad.6.alma.4 |
| AlmaLinux 8 (default stream nginx:1.14 and other retired streams) | Vulnerable; no patch will be provided (AlmaLinux blog) | Switch to the nginx:1.24 stream required |
| CentOS Stream 9, 10 | No fixed package yet; Red Hat is working on fixes (Red Hat Security Bulletin, CVE page) | Red Hat had not released fixed nginx packages at the time of this article |
| Plesk for Linux (sw-nginx for websites, sw-cp-server for the Plesk interface) | Fixed in Plesk Obsidian 18.0.82 Update 4 and 18.0.81 Update 9 of 19 November 2026 (Plesk change log, Plesk article) | nginx 1.30.7 (Plesk Obsidian 18.0.82 Update 3 and earlier and 18.0.81 Update 8 and earlier are vulnerable) |
| Windows Server | Not affected (unless nginx was installed manually) | Not required |
Background on the vulnerabilities
The vulnerabilities allow an attacker, using specially crafted requests, to crash an nginx process or execute malicious code with the privileges of the web server user. According to the researchers, combining them with a further, not yet fixed vulnerability in the Linux kernel (SCTP) could even give an attacker root privileges on the server.
The most severe vulnerability (CVE-2026-123007) affects nginx's HTTP/2 support and exists in all official versions from 1.9.5 to 1.31.8. It can be exploited as soon as nginx offers HTTP/2, even if the server only serves static files. The researchers are currently withholding working exploit code. The developers have released the fixed versions 1.30.7 (stable) and 1.31.9 (mainline).
Who is affected? Servers running nginx earlier than version 1.30.7 (stable) or 1.31.9 (mainline) are affected as long as no fixed version or distribution package with the fix has been installed. Whether a vulnerability can be exploited depends on the configuration:
- CVE-2026-123007 and CVE-2026-123633: HTTP/2 is enabled (for CVE-2026-123633 additionally with forwarding to a backend). This is the case on most HTTPS servers.
- CVE-2026-121810: HTTP/3 (QUIC) is enabled and requests are forwarded to a backend.
- CVE-2026-123634: The "resolver" directive is used with a forwarding destination derived from the request.
- CVE-2026-113425: nginx is operated as a mail proxy (not the case on typical web servers).
Plesk: Plesk for Linux ships nginx as the web server for websites (sw-nginx) and as the web server of the Plesk interface (sw-cp-server). Both components were affected as long as they were based on nginx 1.30.6 or earlier. According to Plesk, this applies to Plesk Obsidian 18.0.82 Update 3 and earlier and to 18.0.81 Update 8 and earlier. With Plesk Obsidian 18.0.82 Update 4 and 18.0.81 Update 9, both components are updated to nginx 1.30.7. According to Plesk, the vulnerabilities could only be exploited if nginx uses HTTP/2, HTTP/3, the "resolver" or "mirror" directives or the mail proxy.
Distributions often apply fixes without changing the version number displayed by nginx -v. What matters is therefore the full package version (on AlmaLinux, e.g. using rpm -q nginx). In addition, an update being available from a vendor does not mean that it has already been installed on your server.
General information on these vulnerabilities can be found, for example, at the following links:
NGINX2Root (Xint)
Xint: NGINX2Root – Remote Code Execution in nginx
nginx security advisories
CVE.org: CVE-2026-123007
For self-managed systems, you are responsible for keeping them updated. If you cannot or do not want to install the update yourself, please submit a request through the KIS. We will then install the updates for you for a fee of EUR 25: https://www.hosteurope.de/faq/server/server-allgemeines/service-standard-patches